Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C<sub>3</sub>H<sub>8</sub>O] at Varying Temperatures

Victoria Bennett; Nimibofa Ayawei

doi:doi:10.11648/j.ajpc.20221103.11

| Peer-Reviewed

Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C₃H₈O] at Varying Temperatures

Victoria Bennett, Nimibofa Ayawei

Published in American Journal of Physical Chemistry (Volume 11, Issue 3)

Received: 9 July 2022 Accepted: 8 August 2022 Published: 17 August 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In potential engineering and process design applications of binary mixtures containing ionic liquids (ILs), the accurate determination of the physiochemical properties plays a pertinent role. Thermodynamic studies can provide an understanding into the nature of intermolecular interactions occurring between the solute and solvent in solutions. To this effect, thermodynamic properties of binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C₃H₈O] have been studied over the concentration range of mole fraction 0–1. Density and viscosity of the pure ionic liquid (IL) and the binary systems were measured and calculated. These data have been used to calculate excess molar volumes, VmE, Excess viscosity, Δη, excess Gibbs free energy of activation of viscous flow, ∆G*E of each component in the mixtures. To derive the binary coefficients and the standard deviations, the results were fitted into the Redlich-Kister Polynomial equation. The experimental and calculated quantities were used to study the nature of intermolecular interactions between the binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C₃H₈O]. Several factors were discovered to have influenced the interactions. Positive excess molar volume (VmE) values reported were influenced by dipole-dipole and dipole-dipole induced interactions between unlike molecules, resulting in the contraction of the molar volumes of the mixtures. The viscosities were correlated with single parameter Grungberg-Nissan, Hind, Frenkel and Kendel- Monroe models.

Published in	American Journal of Physical Chemistry (Volume 11, Issue 3)
DOI	10.11648/j.ajpc.20221103.11
Page(s)	45-51
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Molecular Interaction, Density, Excess Viscosity

References

[1]	Bennett V., Abidemi S. A. and Dikio E. D. (2019). Effect of 1-Butyl-3-methylimidazolium hexafluorophosphate [BMIm][PF₆] on N, N-dimethylformaldehyde: Conductivity Measurement at T (293.15 – 333.15) K Res. J. of Pure Sci and Tech. 2 (1), 1-12.
[2]	Bennett V., Ejidike I. P., Donbebe W. and Dikio E. D. (2018). Interactions of 1-Butyl-3-Methylimidazolium Bromide with Isopropyl alcohol binary system: Spectroscopic and volumetric measurements at T (303.15, 313.15 and 323.15) K. Int. J. of ChemTech Res. 11 (05).
[3]	Bennett V., Angaye S. S. and Dikio E. D. (2017). Conductance of 1-Butyl-3-methylimidazolium nitrate [BMIm][NO₃] with N, N-dimethylformamide at T (293.15 – 323.15) K, Int. J. of Chem. and Chem. Proces. 3 (1) 23–34.
[4]	Bennett V., Ejidike I. P., Ayawei N., Wankasi D. and Dikio E. D. (2017). Synthesis, Characterization and Conductivity Study of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] at T (293.15-323.15) K.. Res. J. of Pharm., Bio. and Chem. Sci. 8 (6), 365-374.
[5]	Bennett V., Dikio C. W., Angaye S. S., Dikio E. D., Bahadur I., Ebenso E. E. (2016). Interactions of 1-butyl-3-methylimidazolium hexaﬂuorophosphate With N, N-dimethylformamide: Density and Viscosity Measurements J. of Mol. Lqs. 219, 661–666.
[6]	Zhigang L. B. C., Yoon-Mo K., Douglas R. M. (2017), Introduction: Ionic Liquids. Chem. Rev. 117, 10, 6633–6635.
[7]	Fraser J. K. and MacFarlane D. R. (2009). Phosphonium-Based Ionic Liquids: An Overview" Aust. J. of Chem. 62 (4): 309–321.
[8]	Luo J., Conrad O. and Vankelecom I. F. J. (2012). Physicochemical properties of phosphonium-based and ammonium-based protic ionic liquids. J. of Mater. Chem. 22 (38): 20574–20579.
[9]	Tripathi A. K. (2021). Ionic liquid–based solid electrolytes (ionogels) for application in rechargeable lithium battery. Mater. Today Energy. 20: 100643.
[10]	Fatemeh M. (2013) Ionic Liquids - New Aspects for the Future ISBN978-953-51-0937-2 DOI: 10.5772/53646.
[11]	Bara, J. E.; Carlisle, T. K.; Gabriel, C. J.; Camper, D.; Finotello, A.; Gin, D. L.; Nobel, R. D. Guide to CO₂ Separations in Imidazolium-Based Room-Temperature Ionic Liquids Ind. Eng. Chem. Res. 2009, 48, 2739–2751 DOI: 10.1021/ie8016237.
[12]	Lei, Z.; Dai, C.; Zhu, J.; Chen, B. Extractive Distillation with Ionic Liquids: A Review AIChE J. 2014, 60, 3312–3329 DOI: 10.1002/aic.14537.
[13]	Mai, N. L.; Koo, Y. M. Computer-Aided Design of Ionic Liquids for High Cellulose Dissolution ACS Sustainable Chem. Eng. 2016, 4, 541–547 DOI: 10.1021/acssuschemeng.5b00958.
[14]	Rojas, M. F.; Bernard, F. L.; Aquino, A.; Borges, J.; Dalla Vecchia, F.; Menezes, S.; Ligabue, R.; Einloft, S. Poly(ionic liquid)s as Efficient Catalyst in Transformation of CO₂ to Cyclic Carbonate J. Mol. Catal. A: Chem. 2014, 392, 83– 88 DOI: 10.1016/j.molcata.2014.05.007.
[15]	Davis J. H. and Fox P. A. (2003). From curiosity to commodities: ionic liquids begin the transition. Chem Comm. 11, 1209-1212.
[16]	Cinzia Chiappe, Marco Malvaldi, Christian Silvio Pomelli (2009) Ionic liquids: Solvation ability and polarity. Pure and Applied Chemistry 81 (4): 767-776 DOI: 10.1351/PAC-CON-08-09-08.
[17]	Suojlang Z., Ning S., Xuezhong H., Xingmel L., Xlangping Z. (2006). Physical properties of ionic liquids: Database and evaluation, China Acad, Sci, Beijing 10080.
[18]	Abbot M. M. and Vanness H. C. (1976). Theories and Problems of Thermodynamics. SI Ed. McGraw-Hill, Inc, 251259.
[19]	Mahajan A. R. and Mirgane S. R. (2013). Study of molecular interactions in binary liquid mixtures of n-alkanes with higher alkanol: An ultrasonic, volumetric and viscometric study. Ind. J. of Chem.- Section A 52A, 624-629.
[20]	Dikio E. D., Vilazi G., Ngoyi T. P. (2013). Density, dynamic and derived properties of binary mixtures of m-xylene, o-xylene and p-xylene, with pyridine at T = 293.15, 303.15, 313.15 and 323.15K, J. Mol. Liqs. 177, 190-197.
[21]	Wei F., Qing Z., Jian S., Suojiang Z. (2009). Density, excess molar volume, and viscosity for the methyl methacrylate + 1-butyl-3-methylimidazolium hexafluorophosphate ionic liquid binary system at atmospheric pressure, J. of Chem. Eng. Data 54, 2307-2311.
[22]	Shruti T. and Shiddhart P. (2010). Temperature dependent densities of mixtures of 1–Butyl–3–methylimidazoliumhexafluorophosphate+poly(ethylene glycol) Ind. J. of Chem. 49A, 731-735.
[23]	Bittencourt S. S., Hoga H. E.; Torres R. B. & Angelo J. V. H., (2019). Thermodynamic properties of binary mixtures of n-butylammonium-based ionic liquids with ethanol at T = (293.15–313.15) K. J. Therm. Analy. Calor. Vol. 135, 2519-2539.
[24]	Redlich O. and Kister A. T. (1948). Thermodynamics of nonelectrolyte solutions, algebraic representation of thermodynamic properties and the classification of solutions. Ing. Eng. Chem. 40, 345-348.
[25]	Canongia L. J. N., Cordeiro T. C., Esperança J. M. S. S., Guedes H. J. R., Huq S., Rebelo L. P. N., Seddon K. R. (2005). On the critical temperature, normal boiling point, and vapor pressure of ionic liquids J. Phys. Chem. B 109, 3519-3525.
[26]	Jereena S. S. (2014). Ultrasonic, Volumetric and Viscometric Studies of Binary Mixtures of N-Alkyl Anilines at Different Temeratures, PhD Thesis, Acharrya Nagarjuna University, India.
[27]	Reed T. M. and Taylor T. E. (1959). Viscosities of liquid mixtures. J. of Phys. Chem. 63, 58.

Cite This Article

Plain Text BibTeX RIS

APA Style

Victoria Bennett, Nimibofa Ayawei. (2022). Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. American Journal of Physical Chemistry, 11(3), 45-51. https://doi.org/10.11648/j.ajpc.20221103.11

Copy | Download

ACS Style

Victoria Bennett; Nimibofa Ayawei. Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. Am. J. Phys. Chem. 2022, 11(3), 45-51. doi: 10.11648/j.ajpc.20221103.11

Copy | Download

AMA Style

Victoria Bennett, Nimibofa Ayawei. Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. Am J Phys Chem. 2022;11(3):45-51. doi: 10.11648/j.ajpc.20221103.11

Copy | Download

@article{10.11648/j.ajpc.20221103.11,
  author = {Victoria Bennett and Nimibofa Ayawei},
  title = {Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures},
  journal = {American Journal of Physical Chemistry},
  volume = {11},
  number = {3},
  pages = {45-51},
  doi = {10.11648/j.ajpc.20221103.11},
  url = {https://doi.org/10.11648/j.ajpc.20221103.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpc.20221103.11},
  abstract = {In potential engineering and process design applications of binary mixtures containing ionic liquids (ILs), the accurate determination of the physiochemical properties plays a pertinent role. Thermodynamic studies can provide an understanding into the nature of intermolecular interactions occurring between the solute and solvent in solutions. To this effect, thermodynamic properties of binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O] have been studied over the concentration range of mole fraction 0–1. Density and viscosity of the pure ionic liquid (IL) and the binary systems were measured and calculated. These data have been used to calculate excess molar volumes, VmE, Excess viscosity, Δη, excess Gibbs free energy of activation of viscous flow, ∆G*E of each component in the mixtures. To derive the binary coefficients and the standard deviations, the results were fitted into the Redlich-Kister Polynomial equation. The experimental and calculated quantities were used to study the nature of intermolecular interactions between the binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O]. Several factors were discovered to have influenced the interactions. Positive excess molar volume (VmE) values reported were influenced by dipole-dipole and dipole-dipole induced interactions between unlike molecules, resulting in the contraction of the molar volumes of the mixtures. The viscosities were correlated with single parameter Grungberg-Nissan, Hind, Frenkel and Kendel- Monroe models.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures
AU  - Victoria Bennett
AU  - Nimibofa Ayawei
Y1  - 2022/08/17
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpc.20221103.11
DO  - 10.11648/j.ajpc.20221103.11
T2  - American Journal of Physical Chemistry
JF  - American Journal of Physical Chemistry
JO  - American Journal of Physical Chemistry
SP  - 45
EP  - 51
PB  - Science Publishing Group
SN  - 2327-2449
UR  - https://doi.org/10.11648/j.ajpc.20221103.11
AB  - In potential engineering and process design applications of binary mixtures containing ionic liquids (ILs), the accurate determination of the physiochemical properties plays a pertinent role. Thermodynamic studies can provide an understanding into the nature of intermolecular interactions occurring between the solute and solvent in solutions. To this effect, thermodynamic properties of binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O] have been studied over the concentration range of mole fraction 0–1. Density and viscosity of the pure ionic liquid (IL) and the binary systems were measured and calculated. These data have been used to calculate excess molar volumes, VmE, Excess viscosity, Δη, excess Gibbs free energy of activation of viscous flow, ∆G*E of each component in the mixtures. To derive the binary coefficients and the standard deviations, the results were fitted into the Redlich-Kister Polynomial equation. The experimental and calculated quantities were used to study the nature of intermolecular interactions between the binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O]. Several factors were discovered to have influenced the interactions. Positive excess molar volume (VmE) values reported were influenced by dipole-dipole and dipole-dipole induced interactions between unlike molecules, resulting in the contraction of the molar volumes of the mixtures. The viscosities were correlated with single parameter Grungberg-Nissan, Hind, Frenkel and Kendel- Monroe models.
VL  - 11
IS  - 3
ER  -

Copy | Download

Author Information

Victoria Bennett

Department of Chemical Sciences, Faculty of Basic and Applied Sciences, University of Africa, Toru-Orua, Sagbama, Nigeria
Nimibofa Ayawei

Department of Chemistry, Faculty of Science, Medical University, Yenagoa, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Victoria Bennett, Nimibofa Ayawei. (2022). Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. American Journal of Physical Chemistry, 11(3), 45-51. https://doi.org/10.11648/j.ajpc.20221103.11

Copy | Download

ACS Style

Victoria Bennett; Nimibofa Ayawei. Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. Am. J. Phys. Chem. 2022, 11(3), 45-51. doi: 10.11648/j.ajpc.20221103.11

Copy | Download

AMA Style

Victoria Bennett, Nimibofa Ayawei. Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures. Am J Phys Chem. 2022;11(3):45-51. doi: 10.11648/j.ajpc.20221103.11

Copy | Download

@article{10.11648/j.ajpc.20221103.11,
  author = {Victoria Bennett and Nimibofa Ayawei},
  title = {Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures},
  journal = {American Journal of Physical Chemistry},
  volume = {11},
  number = {3},
  pages = {45-51},
  doi = {10.11648/j.ajpc.20221103.11},
  url = {https://doi.org/10.11648/j.ajpc.20221103.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpc.20221103.11},
  abstract = {In potential engineering and process design applications of binary mixtures containing ionic liquids (ILs), the accurate determination of the physiochemical properties plays a pertinent role. Thermodynamic studies can provide an understanding into the nature of intermolecular interactions occurring between the solute and solvent in solutions. To this effect, thermodynamic properties of binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O] have been studied over the concentration range of mole fraction 0–1. Density and viscosity of the pure ionic liquid (IL) and the binary systems were measured and calculated. These data have been used to calculate excess molar volumes, VmE, Excess viscosity, Δη, excess Gibbs free energy of activation of viscous flow, ∆G*E of each component in the mixtures. To derive the binary coefficients and the standard deviations, the results were fitted into the Redlich-Kister Polynomial equation. The experimental and calculated quantities were used to study the nature of intermolecular interactions between the binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O]. Several factors were discovered to have influenced the interactions. Positive excess molar volume (VmE) values reported were influenced by dipole-dipole and dipole-dipole induced interactions between unlike molecules, resulting in the contraction of the molar volumes of the mixtures. The viscosities were correlated with single parameter Grungberg-Nissan, Hind, Frenkel and Kendel- Monroe models.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Interactions of Binary Mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlm][l] and Isopropyl Alcohol [C3H8O] at Varying Temperatures
AU  - Victoria Bennett
AU  - Nimibofa Ayawei
Y1  - 2022/08/17
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpc.20221103.11
DO  - 10.11648/j.ajpc.20221103.11
T2  - American Journal of Physical Chemistry
JF  - American Journal of Physical Chemistry
JO  - American Journal of Physical Chemistry
SP  - 45
EP  - 51
PB  - Science Publishing Group
SN  - 2327-2449
UR  - https://doi.org/10.11648/j.ajpc.20221103.11
AB  - In potential engineering and process design applications of binary mixtures containing ionic liquids (ILs), the accurate determination of the physiochemical properties plays a pertinent role. Thermodynamic studies can provide an understanding into the nature of intermolecular interactions occurring between the solute and solvent in solutions. To this effect, thermodynamic properties of binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O] have been studied over the concentration range of mole fraction 0–1. Density and viscosity of the pure ionic liquid (IL) and the binary systems were measured and calculated. These data have been used to calculate excess molar volumes, VmE, Excess viscosity, Δη, excess Gibbs free energy of activation of viscous flow, ∆G*E of each component in the mixtures. To derive the binary coefficients and the standard deviations, the results were fitted into the Redlich-Kister Polynomial equation. The experimental and calculated quantities were used to study the nature of intermolecular interactions between the binary mixtures of 1-Methyl-3-Phenylimidazolium Iodide [MPhlM][l] + Isopropyl Alcohol [C3H8O]. Several factors were discovered to have influenced the interactions. Positive excess molar volume (VmE) values reported were influenced by dipole-dipole and dipole-dipole induced interactions between unlike molecules, resulting in the contraction of the molar volumes of the mixtures. The viscosities were correlated with single parameter Grungberg-Nissan, Hind, Frenkel and Kendel- Monroe models.
VL  - 11
IS  - 3
ER  -

Copy | Download